Admins Handbook

The console shows information from the system by default.
It can also be viewed from a telnet session by this command:

terminal monitor

Make a bat file with the extension .bat or .cmd
Define the the tabs this way in the file:

START http://www.microsoft.com/
START http://www.hp.com/
START http://www.ibm.com/

You can test your network speed with the program iperf. It runs under all most used operating systems. The windows binary file can be found here:
https://nocweboldcst.ucf.edu/files/iperf.exe
or
https://nocweboldcst.ucf.edu/files/iperf.exe

The file iperf.exe is used as client AND server.
The basic idea is that the client UPLOADES an amount of data to the server.
The speed of the transfer is then calculated.

For a deeper introduction watch this Flash guide.

An example:
Server: iperf.exe -s
Client: iperf.exe -c <server-ip>
(Speed is now uploaded to the server)

Use: iperf.exe –help to see options

—–

Test up and then down:

C:\>iperf.exe -c 192.168.0.199 -r
————————————————————
Server listening on TCP port 5001
TCP window size: 8.00 KByte (default)
————————————————————
————————————————————
Client connecting to 192.168.0.199, TCP port 5001
TCP window size: 63.0 KByte (default)
————————————————————
[1876] local 192.168.0.90 port 3975 connected with 192.168.0.199 port 5001
[ ID] Interval       Transfer     Bandwidth
[1876]  0.0-42.9 sec  1.13 MBytes   221 Kbits/sec
[1944] local 192.168.0.90 port 5001 connected with 192.168.0.199 port 4442
[ ID] Interval       Transfer     Bandwidth
[1944]  0.0-10.0 sec  41.5 MBytes  34.9 Mbits/sec

C:\>

Find this path:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Infodelivery\Restrictions
Add this key: NoSearchBox”=dword:00000001

Download reg file

ntp server 213.173.225.86
–
sh ntp status
sh clock

Find this path in regedit:

HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Common\General
and the key: UserTemplates
type: REG_EXPAND_SZ

Just give it a value. (path to a folder)

If you can not find the key UserTemplates, Office is using the standard path:
C:\Documents and Settings\\Application Data\Microsoft\Templates

If you use KIX:
WriteValue(“HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Common\General”, “UserTemplates”, “c:\somefolder”, “REG_EXPAND_SZ”)